Tag Archives: roller bearings

China Standard Single-row Inch Size Tapered Roller Bearings wholesaler

Single-row Inch Size Tapered Roller Bearings

Single row inch size tapered roller bearings are a common type of tapered roller bearings, which are separable. Both the inner and outer rings of the bearing have tapered raceways, and the rollers are in the shape of a truncated cone. The roller and the raceway are in linear contact, which can bear heavier combined radial and axial loads, as well as axial loads. The larger the contact angle, the higher the axial bearing capacity; conversely, the smaller the contact angle, the lower the axial bearing capacity.

The design of Single row inch size tapered roller bearings should extend the contact line between the roller and the inner and outer raceways and then intersect at the same point on the bearing axis for rolling.

Product parameter

Boundary dimensions
(mm)
Mass
(kg)
Bearing NO.
d D T B HZPT
7.937 31.991 10.008 10.785 0.05 A2031/A2126
9.525 31.991 10.008 10.785 0.05 A2037/A2126
11.112 34.988 10.998 10.988 0.05 A4044/A4138
11.987 31.991 10.008 10.785 0.04 A2047/A2126
12.680 34.988 10.998 10.988 0.05 A4049/A4138
12.700 34.988 10.998 10.988 0.05 A4050/A4138
12.700 38.100 13.495 14.072 0.08 00050/00150
14.989 34.988 10.998 10.988 0.04 A4059/A4138
15.875 34.988 10.998 10.998 0.06 L21549/L21511
15.875 39.992 12.014 11.153 0.08 A6062/A6157
15.875 42.862 14.288 14.288 0.10 11590/11520
15.875 42.862 16.670 16.670 0.12 17580/17520
15.875 41.275 14.288 14.681 0.09 03062/03162
15.875 47.000 14.381 14.381 0.14 05062/05185
15.875 49.225 23.020 21.539 0.21 09062/09194
15.875 53.975 22.225 21.839 0.25 21063/21212
15.875 49.225 19.845 21.539 0.19 09062/09195
15.987 46.975 21.000 21.000 0.20 HM81649/HM81610
16.993 39.982 12.014 11.153 0.08 A6067/A6157A
16.993 39.992 12.014 11.153 0.08 A6067/A6157

Series of Single row inch size tapered roller bearings

Popular types of Single inch size tapered roller bearings:

  • A2031/A2126
  • A2037/A2126
  • A4044/A4138

Features of single row inch size tapered roller bearings

  • Low friction
    The flange’s optimized roller end design and surface finish promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels.
  • Long service life
    The crowned raceway profiles of basic design bearings and the logarithmic raceway profiles optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends, and reduce the sensitivity to misalignment and shaft deflection compared with conventional straight raceway profiles.
  • Enhanced operational reliability
    The optimized surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
  • Consistency of roller profiles and sizes
    The rollers incorporated in tapered roller bearings are manufactured to such close dimensional and geometrical tolerances that they are practically identical. This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately.
  • Rigid bearing application
    A single row inch tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
  • Running-in period with reduced temperature peaks
    Tapered roller bearings typically have a running-in period, during which a conventional design tapered roller bearing experiences significant friction, resulting in wear. This effect is noticed as a temperature spike. With a tapered roller bearing design, friction, frictional heat, and wear are significantly reduced, provided the bearings are mounted and lubricated correctly.
  • Separable and interchangeable
    The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). This facilitates mounting, dismounting, and also maintenance inspection routines. Furthermore, the separable components are interchangeable.

Applications of Single row inch size tapered roller bearings

Single row inch size tapered roller bearings are widely used in industries:

  • mining
  • petroleum
  • heavy machinery
  • wind power
  • engineering machinery
  • and other industries

Company Information

We are a professional bearing exporter in China, producing many bearings in different sizes and sizes. We can provide you with excellent service in a wide range of bearings with world-class quality, such as deep groove ball bearings, spherical roller bearings, spherical ball/roller bearings, and cylindrical roller bearings, tapered roller bearings, angular contact Ball bearings, etc. Bearings can also provide OEM services according to customer requirements. We adhere to strict global standards, which is why we can provide you with a wide range of bearings of world-class quality. We have always adhered to the principle of “integrity-based, quality first, customer foremost.” We are ready to use our sincerity to serve every global customer for long-term and win-win cooperation.