Item Description
Gain OF DC Photo voltaic PUMP
one.Permanent magnet DC brushless synchronous motor:The performance is enhanced by 15% – twenty%Preserve energyReduce the usage of photo voltaic panels.
two.304 S/S pump shaft.
3.Brass or stainless steel outlet/connector/oil cylinder.
4.Japanese CZPT bearing:extend the operating daily life.
five.LED screen demonstrates a variety of data such as power,voltage,current,pace and error code and many others.
six.Alloy mechanical seal:For a longer time functioning daily life and substantial dependability.
seven.Motor coil is manufactured by automatic winding equipment with centralized winding technological innovation,motor effectiveness is considerably improved.
eight.Clever water lack protection:The pump stops operating automatically when there is no water in the well,and routinely begin doing work thirty minutes later on.
9.Controller:
(1)Water-proof grade:IP65
(2)Ambient temperature:-15ºC~60ºC
(3)MPPT function,the solar electricity utilization charge is greater.
(4)Computerized charging purpose:Ensure the pump usually working,in the meantime demand the batteryAnd when there is no sunshine,the battery can make the pump continuously doing work.
(5)LED displays the electrical power ,voltage,existing,speed and so on doing work situation.
(6)Frequency conversion purpose:It can instantly operate with frequency conversion in accordance to the solar energy ,and consumer also can change the velocity of pump manually.
(7)Instantly start off and cease functioning.
(8)Waterproof and leak-proofDouble seal effect.
(9)Soft commence:No impulse recent,safeguard the pump motor.
(ten)Large voltage/Low voltage/Above-existing/Substantial temperature safety
10.2 a long time warranty.
Complex Data FOR 2DPC
Item | Sort | Voltage | Greatest input voltage(DC) |
Electrical power | Max-Circulation | Max-Head | Outlet | Cable |
2DPC1.5-35-24-200 | Plastic Impeller | 24V | 30V-48V | 200W | 1.5m³/h | 35m | .75” | 2m |
2DPC1.7-forty five-24-three hundred | Plastic Impeller | 24V | 30V-48V | 300W | 1.7m³/h | 45m | .75” | 2m |
2DPC1.7-64-forty eight-400 | Plastic Impeller | 24V | 60V-90V | 400W | one.7m³/h | 64m | .75” | 2m |
Specialized Information FOR 3DSS
Merchandise | Sort | Voltage | Ideal input voltage(DC) |
Energy | Max-Circulation | Max-Head | Outlet | Cable |
3DSS0.5-28-12-80 | Screw | 12V | 20V-36V | 80W | .5m³/h | 28m | .75” | 2m |
3DSS1.2-56-24-one hundred twenty | Screw | 24V | 30V-48V | 120W | one.2m³/h | 56m | .75” | 2m |
3DSS1.2-seventy seven-36-210 | Screw | 36V | 30V-48V | 210W | one.2m³/h | 77m | .75” | 2m |
3DSS1.7-109-48-five hundred | Screw | 48V | 60V-90V | 500W | one.7m³/h | 109m | .75” | 2m |
3DSS2.-150-48-750 | Screw | 48V | 60V-90V | 750W | two.0m³/h | 150m | .75” | 2m |
3DSS2.-one hundred fifty-72-750 | Screw | 72V | 90V-120V | 750W | 2.0m³/h | 150m | .75” | 2m |
3DSS2.2-one hundred eighty-72-1100 | Screw | 72V | 90V-120V | 1100W | two.2m³/h | 180m | .75” | 2m |
Complex Knowledge FOR 3DPC
Item | Type | Voltage | Greatest input voltage(DC) |
Energy | Max-Movement | Max-Head | Outlet | Cable |
3DPC3-25-24-two hundred | Plastic Impeller | 24V | 30V-48V | 200W | three.0m³/h | 25m | one.25” | 2m |
3DPC3-35-24-three hundred | Plastic Impeller | 24V | 30V-48V | 300W | three.0m³/h | 35m | 1.25” | 2m |
3DPC3.5-forty seven-48-400 | Plastic Impeller | 48V | 60V-90V | 400W | 3.5m³/h | 47m | 1.25” | 2m |
3DPC3.5-80-forty eight-600 | Plastic Impeller | 48V | 60V-90V | 600W | 3.5m³/h | 80m | one.25” | 2m |
3DPC3.5-eighty-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | three.5m³/h | 80m | one.25” | 2m |
3DPC3.5-ninety five-forty eight-750 | Plastic Impeller | 48V | 60V-90V | 750W | three.5m³/h | 95m | one.25” | 2m |
3DPC3.5-ninety five-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | three.5m³/h | 95m | one.25” | 2m |
3DPC3.8-123-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 3.8m³/h | 123m | one.25” | 2m |
3DPC3.8-123-one hundred ten-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.8m³/h | 123m | one.25” | 2m |
3DPC3.8-one hundred fifty five-one hundred ten-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | three.8m³/h | 155m | 1.25” | 2m |
3DPC3.8-a hundred and eighty-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | three.8m³/h | 180m | 1.25” | 2m |
Specialized Knowledge FOR 3DPC
Item | Sort | Voltage | Very best enter voltage(DC) |
Energy | Max-Flow | Max-Head | Outlet | Cable |
3DPC5-45-48-500 | Plastic Impeller | 48V | 60V-90V | 500W | 3.0m³/h | 45m | 1.5” | 2m |
3DPC5.2-fifty-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | three.0m³/h | 50m | one.5” | 2m |
3DPC5.2-50-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 3.5m³/h | 50m | one.5” | 2m |
3DPC5.2-seventy five-a hundred and ten-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.5m³/h | 75m | one.5” | 2m |
3DPC5.5-sixty five-seventy two-750 | Plastic Impeller | 72V | 90V-120V | 750W | three.5m³/h | 65m | one.5” | 2m |
3DPC5.5-65-a hundred and ten-750 | Plastic Impeller | 110V | 110V-150V | 750W | three.5m³/h | 65m | one.5” | 2m |
3DPC6-84-one hundred ten-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.5m³/h | 84m | one.5” | 2m |
3DPC6-a hundred twenty five-one hundred ten-1100 | Plastic Impeller | 110V | 110V-150V | 1500W | three.8m³/h | 125m | one.5” | 2m |
3DPC7-46-seventy two-750 | Plastic Impeller | 72V | 90V-120V | 750W | three.8m³/h | 46m | 1.5” | 2m |
3DPC7-forty six-a hundred and ten-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.8m³/h | 46m | 1.5” | 2m |
3DPC7.5-sixty two-one hundred ten-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | three.8m³/h | 62m | 1.5” | 2m |
3DPC7.5-seventy eight-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 78m | 1.5” | 2m |
Specialized Information FOR 3DSC
Product | Kind | Voltage | Best input voltage(DC) |
Energy | Max-Circulation | Max-Head | Outlet | Cable |
3DSC4-35-24-300 | Stainless steel Impeller | 24V | 30V-48V | 300W | 4.0m³/h | 35m | 1.25” | 2m |
3DSC4-fifty-forty eight-four hundred | Stainless metal Impeller | 48V | 60V-90V | 400W | four.0m³/h | 50m | 1.25” | 2m |
3DSC4-eighty-forty eight-four hundred | Stainless metal Impeller | 48V | 60V-90V | 600W | four.0m³/h | 80m | 1.25” | 2m |
3DSC4.8-ninety five-72-750 | Stainless steel Impeller | 72V | 90V-120V | 750W | four.8m³/h | 95m | one.25” | 2m |
3DSC4.8-112-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 4.8m³/h | 112m | 1.25” | 2m |
3DSC4.8-112-110-1100 | Stainless metal Impeller | 110V | 110V-150V | 1100W | four.8m³/h | 112m | 1.25” | 2m |
3DSC4.8-one hundred thirty five-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | four.8m³/h | 135m | 1.25” | 2m |
Complex Knowledge FOR 4DPC
Item | Kind | Voltage | Greatest input voltage(DC) |
Energy | Max-Stream | Max-Head | Outlet | Cable |
4DPC6-42-forty eight-600 | Plastic Impeller | 48V | 60V-90V | 600W | six.0m³/h | 42m | 1.25” | 2m |
4DPC6-42-seventy two-600 | Plastic Impeller | 72V | 90V-120V | 600W | six.0m³/h | 42m | one.25” | 2m |
4DPC6-fifty six-forty eight-750 | Plastic Impeller | 48V | 60V-90V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-56-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-eighty four-seventy two-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 6.0m³/h | 84m | one.25” | 2m |
4DPC6-84-one hundred ten-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | six.0m³/h | 84m | one.25” | 2m |
4DPC6-112-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 6.0m³/h | 112m | one.25” | 2m |
4DPC6-a hundred thirty five-a hundred and ten-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 6.0m³/h | 135m | one.25” | 2m |
Technological Information FOR 4DPC
Merchandise | Kind | Voltage | Ideal input voltage(DC) |
Energy | Max-Movement | Max-Head | Outlet | Cable |
4DPC9-45-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | nine.0m³/h | 45m | 2” | 2m |
4DPC9-58-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | nine.0m³/h | 58m | 2” | 2m |
4DPC9-seventy one-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | nine.0m³/h | 71m | 2” | 2m |
4DPC9-85-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | nine.0m³/h | 85m | 2” | 2m |
4DPC | Plastic Impeller | 110V | 110V-150V | 750W | thirteen.0m³/h | 36m | 2” | 2m |
4DPC | Plastic Impeller | 110V | 110V-150V | 1100W | 13.0m³/h | 49m | 2” | 2m |
4DPC | Plastic Impeller | 110V | 110V-150V | 1300W | thirteen.0m³/h | 54m | 2” | 2m |
4DPC | Plastic Impeller | 110V | 110V-150V | 1500W | thirteen.0m³/h | 60m | 2” | 2m |
4DPC | Plastic Impeller | 110V | 110V-150V | 1500W | 17.0m³/h | 48m | 2” | 2m |
Complex Data FOR 4DLR
Merchandise | Kind | Voltage | Greatest enter voltage(DC) |
Energy | Max-Circulation | Max-Head | Outlet | Cable |
4DLR5-eighty five-one hundred ten-750 | Plastic Impeller | 110V | 110V-150V | 750W | five.0m³/h | 85m | one.25” | 2m |
4DLR6-sixty five-72-550 | Plastic Impeller | 72V | 90V-120V | 550W | six.0m³/h | 65m | 1.25” | 2m |
4DLR7.5-65-one hundred ten-750 | Plastic Impeller | 110V | 110V-150V | 750W | 7.5m³/h | 65m | one.5” | 2m |
4DLR7.5-one hundred-seventy two-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 7.5m³/h | 100m | one.5” | 2m |
4DLR7.5-one hundred ten-one hundred ten-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 7.5m³/h | 110m | 1.5” | 2m |
4DLR | Plastic Impeller | 72V | 90V-120V | 550W | 11.0m³/h | 45m | 2” | 2m |
4DLR | Plastic Impeller | 72V | 90V-120V | 1100W | twelve.0m³/h | 75m | 2” | 2m |
4DLR11.5-100-one hundred ten-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 11.5m³/h | 100m | 2” | 2m |
4DLR14.5-forty five-a hundred and ten-750 | Plastic Impeller | 110V | 110V-150V | 750W | fourteen.5m³/h | 45m | 2” | 2m |
4DLR | Plastic Impeller | 72V | 90V-120V | 1100W | fifteen.0m³/h | 55m | 2” | 2m |
4DLR15.5-70-a hundred and ten-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 15.5m³/h | 70m | 2” | 2m |
4DLR | Plastic Impeller | 110V | 110V-150V | 1500W | twenty.0m³/h | 38m | 2” | 2m |
Complex Information FOR 4DSC
Item | Sort | Voltage | Ideal input voltage(DC) |
Electricity | Max-Circulation | Max-Head | Outlet | Cable |
4DSC5.2-forty five-48-500 | Stainless metal Impeller | 48V | 60V-90V | 500W | 5.2m³/h | 45m | one.25” | 2m |
4DSC5.2-67-forty eight-750 | Stainless steel Impeller | 48V | 60V-90V | 750W | 5.2m³/h | 67m | 1.25” | 2m |
4DSC5.2-67-72-750 | Stainless steel Impeller | 72V | 90V-120V | 750W | 5.2m³/h | 67m | 1.25” | 2m |
4DSC5.2-one hundred and one-seventy two-1100 | Stainless metal Impeller | 72V | 90V-120V | 1100W | 5.2m³/h | 101m | 1.25” | 2m |
4DSC5.2-a hundred and one-one hundred ten-1100 | Stainless steel Impeller | 110V | 110V-150V | 1100W | 5.2m³/h | 101m | one.25” | 2m |
4DSC5.2-146-one hundred ten-1300 | Stainless steel Impeller | 110V | 110V-150V | 1300W | five.2m³/h | 146m | one.25” | 2m |
4DSC4.8-203-a hundred and ten-1500 | Stainless metal Impeller | 110V | 110V-150V | 1500W | 4.8m³/h | 203m | one.25” | 2m |
4DSC7.5-80-110-1300 | Stainless steel Impeller | 110V | 110V-150V | 1300W | 7.5m³/h | 80m | one.25” | 2m |
4DSC7.5-one hundred-110-1500 | Stainless metal Impeller | 110V | 110V-150V | 1500W | 7.5m³/h | 100m | 1.25” | 2m |
Technological Knowledge FOR 4DSC/4/6DSC
Product | Variety | Voltage | Very best input voltage(DC) |
Energy | Max-Circulation | Max-Head | Outlet | Cable |
4DSC | Stainless steel Impeller | 110V | 110V-150V | 1500W | eleven.0m³/h | 60m | 2” | 2m |
4DSC | Stainless steel Impeller | 110V | 110V-150V | 1500W | 19.0m³/h | 35m | 2” | 2m |
4DSC | Stainless metal Impeller | 110V | 110V-150V | 1500W | 25.0m³/h | 26m | 2” | 2m |
four/6DSC | Stainless metal Impeller | 72V | 90V-120V | 1100W | thirty.0m³/h | 19m | 2” | 2m |
4/6DSC | Stainless steel Impeller | 110V | 110V-150V | 1500W | 34.0m³/h | 22m | 2” | 2m |
Specialized Information FOR 3DPC-A/D
Merchandise | Variety | Voltage | Ideal enter voltage(DC) |
Power | Max-Stream | Max-Head | Outlet | Cable |
3DPC3.5-95-a hundred and ten-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | three.5m³/h | 95m | one.25” | 2m |
3DPC3.8-123-one hundred fifty-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | three.8m³/h | 123m | one.25” | 2m |
3DPC3.8-one hundred fifty five-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | three.8m³/h | 155m | 1.25” | 2m |
3DPC3.8-one hundred eighty-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | three.8m³/h | 180m | 1.25” | 2m |
3DPC5.2-75-one hundred ten-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 5.2m³/h | 75m | one.5” | 2m |
3DPC5.5-65-a hundred and ten-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | five.5m³/h | 65m | one.5” | 2m |
3DPC6-eighty four-a hundred and fifty-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 6.0m³/h | 84m | 1.5” | 2m |
3DPC6-a hundred twenty five-two hundred-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 6.0m³/h | 125m | one.5” | 2m |
3DPC7-forty six-a hundred and ten-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | seven.0m³/h | 46m | one.5” | 2m |
3DPC7.5-sixty two–a hundred and fifty-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | seven.5m³/h | 62m | 1.5” | 2m |
3DPC7.5-seventy eight-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 7.5m³/h | 78m | 1.5” | 2m |
Technical Information FOR 3DSC-A/D
Merchandise | Variety | Voltage | Ideal enter voltage(DC) |
Electrical power | Max-Stream | Max-Head | Outlet | Cable |
3DSC4.8-ninety five-a hundred and ten-750-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 750W | four.8m³/h | 95m | one.25” | 2m |
3DSC4.8-110-one hundred fifty-1100-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 1100W | 4.8m³/h | 110m | one.25” | 2m |
3DSC4.8-130-200-1500-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 1500W | 4.8m³/h | 130m | 1.25” | 2m |
Specialized Info FOR 4DPC-A/D
Merchandise | Type | Voltage | Best enter voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC6-56-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | six.0m³/h | 56m | one.25” | 2m |
4DPC6-eighty four-one hundred fifty-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | six.0m³/h | 84m | 1.25” | 2m |
4DPC6-112-one hundred fifty-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | six.0m³/h | 112m | one.25” | 2m |
4DPC6-a hundred thirty five-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | six.0m³/h | 135m | one.25” | 2m |
4DPC9-forty five-one hundred ten-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 9.0m³/h | 45m | 2” | 2m |
4DPC9-58-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | nine.0m³/h | 58m | 2” | 2m |
4DPC9-71-a hundred and fifty-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 9.0m³/h | 71m | 2” | 2m |
4DPC9-85-two hundred-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 9.0m³/h | 85m | 2” | 2m |
4DPC-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 13.0m³/h | 36m | 2” | 2m |
4DPC-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 13.0m³/h | 49m | 2” | 2m |
4DPC-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 13.0m³/h | 54m | 2” | 2m |
4DPC-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | thirteen.0m³/h | 60m | 2” | 2m |
4DPC-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 17.0m³/h | 48m | 2” | 2m |
FAQ:
Q: What is the delivery time?
A:The sample can be despatched to client inside of 10-fifteen days.
The batch purchase can be transported within 35 times after receiving deposit payment
Q:Exactly where is your loading port?
A: HangZhou port, China
Q: Is it all right to make customer’s own model title?
A: Can make OEM if get amount achieved 1000pcs absolutely
Q: What is your payment expression?
A: thirty% in advance, 70% stability the B/L or T/T
Q: What is the guarantee of the item?
A: We supply 1 yr item existence ensure and a generous 1 calendar year warranty on all buys that commence with the BL
Q: What data shall I provide you when I need your supply?
A: Generally, we need to have customer to offer the pump movement, overall head, pump material (copper wire or aluminum wire? Stator length), voltage, frequency, and so forth, so we can quotation just what consumer need
Q: Can you settle for customized items?
A: Of course we acknowledge your particular buy if you could give us with your demands.
Q: Will you offer any spare areas with the pumps?
A: Sure, we can provide for illustration: tank, versatile hose, stress change, stress gauge, brass connector, cable, etc.
Q: Is there any leakage issue of this pump?
A: Some factory might have these kinds of problem, but we solved it quite effectively, by making use of good substance of pump casing, O-ring, and they in shape every other perfect. We use 8 screw on the pump head even though other people might use only 6 screw to preserve value. We test one hundred% and lengthy time for the pump head component, to make confident there is no leakage issue.
Q: Do you provide sample?
A: We can source sample, but client have to pay for the sample fee
Q: What is the supply time?
A:thirty-45 after we receiving your deposit.
Q:Where is your loading port?
A: HangZhou port, China
Q: Where did you export to?
A: We export to far more than 50 international locations, for example, Israel, South Africa, Germany, Poland, Spain, Vietnam, Malaysia, Russia, Thailand, Mexico, Brazil, Chile, and many others.
Q: Can I get any price cut if purchase CZPT PUMP brand?
A: At the instant, client can get lower supply if they acquire CZPT PUMP brand name but nonetheless get identical very good high quality pumps as usually.
Q: Can I get some strain tank, versatile hose, 5-way connector, force gauge, force controller and assemble with the pump?
A: Yes, a lot of consumer acquire by this way, and we can make quite good job to have this booster method to be assembled without any problem.
Q: Can the pump be made by personalized voltage and frequency
A: Of course, 220-240V, 110V, 50Hz, 60Hz, we can make according to customer’s need to have
US $125-520 / Piece | |
1 Piece (Min. Order) |
###
Max.Head: | >150m |
---|---|
Max.Capacity: | >400 L/min |
Driving Type: | Motor |
Material: | Stainless Steel |
Structure: | Single-stage Pump |
Assembly: | Booster Pump |
###
Samples: |
US$ 250/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
2DPC1.5-35-24-200 | Plastic Impeller | 24V | 30V-48V | 200W | 1.5m³/h | 35m | 0.75” | 2m |
2DPC1.7-45-24-300 | Plastic Impeller | 24V | 30V-48V | 300W | 1.7m³/h | 45m | 0.75” | 2m |
2DPC1.7-64-48-400 | Plastic Impeller | 24V | 60V-90V | 400W | 1.7m³/h | 64m | 0.75” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DSS0.5-28-12-80 | Screw | 12V | 20V-36V | 80W | 0.5m³/h | 28m | 0.75” | 2m |
3DSS1.2-56-24-120 | Screw | 24V | 30V-48V | 120W | 1.2m³/h | 56m | 0.75” | 2m |
3DSS1.2-77-36-210 | Screw | 36V | 30V-48V | 210W | 1.2m³/h | 77m | 0.75” | 2m |
3DSS1.7-109-48-500 | Screw | 48V | 60V-90V | 500W | 1.7m³/h | 109m | 0.75” | 2m |
3DSS2.0-150-48-750 | Screw | 48V | 60V-90V | 750W | 2.0m³/h | 150m | 0.75” | 2m |
3DSS2.0-150-72-750 | Screw | 72V | 90V-120V | 750W | 2.0m³/h | 150m | 0.75” | 2m |
3DSS2.2-180-72-1100 | Screw | 72V | 90V-120V | 1100W | 2.2m³/h | 180m | 0.75” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DPC3-25-24-200 | Plastic Impeller | 24V | 30V-48V | 200W | 3.0m³/h | 25m | 1.25” | 2m |
3DPC3-35-24-300 | Plastic Impeller | 24V | 30V-48V | 300W | 3.0m³/h | 35m | 1.25” | 2m |
3DPC3.5-47-48-400 | Plastic Impeller | 48V | 60V-90V | 400W | 3.5m³/h | 47m | 1.25” | 2m |
3DPC3.5-80-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | 3.5m³/h | 80m | 1.25” | 2m |
3DPC3.5-80-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 3.5m³/h | 80m | 1.25” | 2m |
3DPC3.5-95-48-750 | Plastic Impeller | 48V | 60V-90V | 750W | 3.5m³/h | 95m | 1.25” | 2m |
3DPC3.5-95-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 3.5m³/h | 95m | 1.25” | 2m |
3DPC3.8-123-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 3.8m³/h | 123m | 1.25” | 2m |
3DPC3.8-123-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.8m³/h | 123m | 1.25” | 2m |
3DPC3.8-155-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 3.8m³/h | 155m | 1.25” | 2m |
3DPC3.8-180-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 180m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DPC5-45-48-500 | Plastic Impeller | 48V | 60V-90V | 500W | 3.0m³/h | 45m | 1.5” | 2m |
3DPC5.2-50-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | 3.0m³/h | 50m | 1.5” | 2m |
3DPC5.2-50-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 3.5m³/h | 50m | 1.5” | 2m |
3DPC5.2-75-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.5m³/h | 75m | 1.5” | 2m |
3DPC5.5-65-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 3.5m³/h | 65m | 1.5” | 2m |
3DPC5.5-65-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.5m³/h | 65m | 1.5” | 2m |
3DPC6-84-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.5m³/h | 84m | 1.5” | 2m |
3DPC6-125-110-1100 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 125m | 1.5” | 2m |
3DPC7-46-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 3.8m³/h | 46m | 1.5” | 2m |
3DPC7-46-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.8m³/h | 46m | 1.5” | 2m |
3DPC7.5-62-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.8m³/h | 62m | 1.5” | 2m |
3DPC7.5-78-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 78m | 1.5” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DSC4-35-24-300 | Stainless steel Impeller | 24V | 30V-48V | 300W | 4.0m³/h | 35m | 1.25” | 2m |
3DSC4-50-48-400 | Stainless steel Impeller | 48V | 60V-90V | 400W | 4.0m³/h | 50m | 1.25” | 2m |
3DSC4-80-48-400 | Stainless steel Impeller | 48V | 60V-90V | 600W | 4.0m³/h | 80m | 1.25” | 2m |
3DSC4.8-95-72-750 | Stainless steel Impeller | 72V | 90V-120V | 750W | 4.8m³/h | 95m | 1.25” | 2m |
3DSC4.8-112-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 4.8m³/h | 112m | 1.25” | 2m |
3DSC4.8-112-110-1100 | Stainless steel Impeller | 110V | 110V-150V | 1100W | 4.8m³/h | 112m | 1.25” | 2m |
3DSC4.8-135-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 4.8m³/h | 135m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC6-42-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | 6.0m³/h | 42m | 1.25” | 2m |
4DPC6-42-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 6.0m³/h | 42m | 1.25” | 2m |
4DPC6-56-48-750 | Plastic Impeller | 48V | 60V-90V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-56-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-84-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 6.0m³/h | 84m | 1.25” | 2m |
4DPC6-84-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 6.0m³/h | 84m | 1.25” | 2m |
4DPC6-112-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 6.0m³/h | 112m | 1.25” | 2m |
4DPC6-135-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 6.0m³/h | 135m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC9-45-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 9.0m³/h | 45m | 2” | 2m |
4DPC9-58-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 9.0m³/h | 58m | 2” | 2m |
4DPC9-71-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 9.0m³/h | 71m | 2” | 2m |
4DPC9-85-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 9.0m³/h | 85m | 2” | 2m |
4DPC13-36-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 13.0m³/h | 36m | 2” | 2m |
4DPC13-49-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 13.0m³/h | 49m | 2” | 2m |
4DPC13-54-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 13.0m³/h | 54m | 2” | 2m |
4DPC13-60-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 13.0m³/h | 60m | 2” | 2m |
4DPC17-48-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 17.0m³/h | 48m | 2” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DLR5-85-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 5.0m³/h | 85m | 1.25” | 2m |
4DLR6-65-72-550 | Plastic Impeller | 72V | 90V-120V | 550W | 6.0m³/h | 65m | 1.25” | 2m |
4DLR7.5-65-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 7.5m³/h | 65m | 1.5” | 2m |
4DLR7.5-100-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 7.5m³/h | 100m | 1.5” | 2m |
4DLR7.5-110-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 7.5m³/h | 110m | 1.5” | 2m |
4DLR11-45-72-550 | Plastic Impeller | 72V | 90V-120V | 550W | 11.0m³/h | 45m | 2” | 2m |
4DLR12-75-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 12.0m³/h | 75m | 2” | 2m |
4DLR11.5-100-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 11.5m³/h | 100m | 2” | 2m |
4DLR14.5-45-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 14.5m³/h | 45m | 2” | 2m |
4DLR15-55-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 15.0m³/h | 55m | 2” | 2m |
4DLR15.5-70-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 15.5m³/h | 70m | 2” | 2m |
4DLR20-38-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 20.0m³/h | 38m | 2” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DSC5.2-45-48-500 | Stainless steel Impeller | 48V | 60V-90V | 500W | 5.2m³/h | 45m | 1.25” | 2m |
4DSC5.2-67-48-750 | Stainless steel Impeller | 48V | 60V-90V | 750W | 5.2m³/h | 67m | 1.25” | 2m |
4DSC5.2-67-72-750 | Stainless steel Impeller | 72V | 90V-120V | 750W | 5.2m³/h | 67m | 1.25” | 2m |
4DSC5.2-101-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 5.2m³/h | 101m | 1.25” | 2m |
4DSC5.2-101-110-1100 | Stainless steel Impeller | 110V | 110V-150V | 1100W | 5.2m³/h | 101m | 1.25” | 2m |
4DSC5.2-146-110-1300 | Stainless steel Impeller | 110V | 110V-150V | 1300W | 5.2m³/h | 146m | 1.25” | 2m |
4DSC4.8-203-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 4.8m³/h | 203m | 1.25” | 2m |
4DSC7.5-80-110-1300 | Stainless steel Impeller | 110V | 110V-150V | 1300W | 7.5m³/h | 80m | 1.25” | 2m |
4DSC7.5-100-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 7.5m³/h | 100m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DSC11-60-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 11.0m³/h | 60m | 2” | 2m |
4DSC19-35-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 19.0m³/h | 35m | 2” | 2m |
4DSC25-26-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 25.0m³/h | 26m | 2” | 2m |
4/6DSC30-19-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 30.0m³/h | 19m | 2” | 2m |
4/6DSC34-22-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 34.0m³/h | 22m | 2” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DPC3.5-95-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 3.5m³/h | 95m | 1.25” | 2m |
3DPC3.8-123-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 3.8m³/h | 123m | 1.25” | 2m |
3DPC3.8-155-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 3.8m³/h | 155m | 1.25” | 2m |
3DPC3.8-180-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 3.8m³/h | 180m | 1.25” | 2m |
3DPC5.2-75-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 5.2m³/h | 75m | 1.5” | 2m |
3DPC5.5-65-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 5.5m³/h | 65m | 1.5” | 2m |
3DPC6-84-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 6.0m³/h | 84m | 1.5” | 2m |
3DPC6-125-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 6.0m³/h | 125m | 1.5” | 2m |
3DPC7-46-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 7.0m³/h | 46m | 1.5” | 2m |
3DPC7.5-62–150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 7.5m³/h | 62m | 1.5” | 2m |
3DPC7.5-78-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 7.5m³/h | 78m | 1.5” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DSC4.8-95-110-750-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 750W | 4.8m³/h | 95m | 1.25” | 2m |
3DSC4.8-110-150-1100-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 1100W | 4.8m³/h | 110m | 1.25” | 2m |
3DSC4.8-130-200-1500-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 1500W | 4.8m³/h | 130m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC6-56-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-84-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 6.0m³/h | 84m | 1.25” | 2m |
4DPC6-112-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 6.0m³/h | 112m | 1.25” | 2m |
4DPC6-135-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 6.0m³/h | 135m | 1.25” | 2m |
4DPC9-45-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 9.0m³/h | 45m | 2” | 2m |
4DPC9-58-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 9.0m³/h | 58m | 2” | 2m |
4DPC9-71-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 9.0m³/h | 71m | 2” | 2m |
4DPC9-85-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 9.0m³/h | 85m | 2” | 2m |
4DPC13-36-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 13.0m³/h | 36m | 2” | 2m |
4DPC13-49-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 13.0m³/h | 49m | 2” | 2m |
4DPC13-54-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 13.0m³/h | 54m | 2” | 2m |
4DPC13-60-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 13.0m³/h | 60m | 2” | 2m |
4DPC17-48-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 17.0m³/h | 48m | 2” | 2m |
US $125-520 / Piece | |
1 Piece (Min. Order) |
###
Max.Head: | >150m |
---|---|
Max.Capacity: | >400 L/min |
Driving Type: | Motor |
Material: | Stainless Steel |
Structure: | Single-stage Pump |
Assembly: | Booster Pump |
###
Samples: |
US$ 250/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
2DPC1.5-35-24-200 | Plastic Impeller | 24V | 30V-48V | 200W | 1.5m³/h | 35m | 0.75” | 2m |
2DPC1.7-45-24-300 | Plastic Impeller | 24V | 30V-48V | 300W | 1.7m³/h | 45m | 0.75” | 2m |
2DPC1.7-64-48-400 | Plastic Impeller | 24V | 60V-90V | 400W | 1.7m³/h | 64m | 0.75” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DSS0.5-28-12-80 | Screw | 12V | 20V-36V | 80W | 0.5m³/h | 28m | 0.75” | 2m |
3DSS1.2-56-24-120 | Screw | 24V | 30V-48V | 120W | 1.2m³/h | 56m | 0.75” | 2m |
3DSS1.2-77-36-210 | Screw | 36V | 30V-48V | 210W | 1.2m³/h | 77m | 0.75” | 2m |
3DSS1.7-109-48-500 | Screw | 48V | 60V-90V | 500W | 1.7m³/h | 109m | 0.75” | 2m |
3DSS2.0-150-48-750 | Screw | 48V | 60V-90V | 750W | 2.0m³/h | 150m | 0.75” | 2m |
3DSS2.0-150-72-750 | Screw | 72V | 90V-120V | 750W | 2.0m³/h | 150m | 0.75” | 2m |
3DSS2.2-180-72-1100 | Screw | 72V | 90V-120V | 1100W | 2.2m³/h | 180m | 0.75” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DPC3-25-24-200 | Plastic Impeller | 24V | 30V-48V | 200W | 3.0m³/h | 25m | 1.25” | 2m |
3DPC3-35-24-300 | Plastic Impeller | 24V | 30V-48V | 300W | 3.0m³/h | 35m | 1.25” | 2m |
3DPC3.5-47-48-400 | Plastic Impeller | 48V | 60V-90V | 400W | 3.5m³/h | 47m | 1.25” | 2m |
3DPC3.5-80-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | 3.5m³/h | 80m | 1.25” | 2m |
3DPC3.5-80-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 3.5m³/h | 80m | 1.25” | 2m |
3DPC3.5-95-48-750 | Plastic Impeller | 48V | 60V-90V | 750W | 3.5m³/h | 95m | 1.25” | 2m |
3DPC3.5-95-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 3.5m³/h | 95m | 1.25” | 2m |
3DPC3.8-123-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 3.8m³/h | 123m | 1.25” | 2m |
3DPC3.8-123-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.8m³/h | 123m | 1.25” | 2m |
3DPC3.8-155-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 3.8m³/h | 155m | 1.25” | 2m |
3DPC3.8-180-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 180m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DPC5-45-48-500 | Plastic Impeller | 48V | 60V-90V | 500W | 3.0m³/h | 45m | 1.5” | 2m |
3DPC5.2-50-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | 3.0m³/h | 50m | 1.5” | 2m |
3DPC5.2-50-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 3.5m³/h | 50m | 1.5” | 2m |
3DPC5.2-75-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.5m³/h | 75m | 1.5” | 2m |
3DPC5.5-65-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 3.5m³/h | 65m | 1.5” | 2m |
3DPC5.5-65-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.5m³/h | 65m | 1.5” | 2m |
3DPC6-84-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.5m³/h | 84m | 1.5” | 2m |
3DPC6-125-110-1100 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 125m | 1.5” | 2m |
3DPC7-46-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 3.8m³/h | 46m | 1.5” | 2m |
3DPC7-46-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 3.8m³/h | 46m | 1.5” | 2m |
3DPC7.5-62-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 3.8m³/h | 62m | 1.5” | 2m |
3DPC7.5-78-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 3.8m³/h | 78m | 1.5” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DSC4-35-24-300 | Stainless steel Impeller | 24V | 30V-48V | 300W | 4.0m³/h | 35m | 1.25” | 2m |
3DSC4-50-48-400 | Stainless steel Impeller | 48V | 60V-90V | 400W | 4.0m³/h | 50m | 1.25” | 2m |
3DSC4-80-48-400 | Stainless steel Impeller | 48V | 60V-90V | 600W | 4.0m³/h | 80m | 1.25” | 2m |
3DSC4.8-95-72-750 | Stainless steel Impeller | 72V | 90V-120V | 750W | 4.8m³/h | 95m | 1.25” | 2m |
3DSC4.8-112-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 4.8m³/h | 112m | 1.25” | 2m |
3DSC4.8-112-110-1100 | Stainless steel Impeller | 110V | 110V-150V | 1100W | 4.8m³/h | 112m | 1.25” | 2m |
3DSC4.8-135-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 4.8m³/h | 135m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC6-42-48-600 | Plastic Impeller | 48V | 60V-90V | 600W | 6.0m³/h | 42m | 1.25” | 2m |
4DPC6-42-72-600 | Plastic Impeller | 72V | 90V-120V | 600W | 6.0m³/h | 42m | 1.25” | 2m |
4DPC6-56-48-750 | Plastic Impeller | 48V | 60V-90V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-56-72-750 | Plastic Impeller | 72V | 90V-120V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-84-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 6.0m³/h | 84m | 1.25” | 2m |
4DPC6-84-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 6.0m³/h | 84m | 1.25” | 2m |
4DPC6-112-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 6.0m³/h | 112m | 1.25” | 2m |
4DPC6-135-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 6.0m³/h | 135m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC9-45-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 9.0m³/h | 45m | 2” | 2m |
4DPC9-58-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 9.0m³/h | 58m | 2” | 2m |
4DPC9-71-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 9.0m³/h | 71m | 2” | 2m |
4DPC9-85-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 9.0m³/h | 85m | 2” | 2m |
4DPC13-36-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 13.0m³/h | 36m | 2” | 2m |
4DPC13-49-110-1100 | Plastic Impeller | 110V | 110V-150V | 1100W | 13.0m³/h | 49m | 2” | 2m |
4DPC13-54-110-1300 | Plastic Impeller | 110V | 110V-150V | 1300W | 13.0m³/h | 54m | 2” | 2m |
4DPC13-60-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 13.0m³/h | 60m | 2” | 2m |
4DPC17-48-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 17.0m³/h | 48m | 2” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DLR5-85-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 5.0m³/h | 85m | 1.25” | 2m |
4DLR6-65-72-550 | Plastic Impeller | 72V | 90V-120V | 550W | 6.0m³/h | 65m | 1.25” | 2m |
4DLR7.5-65-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 7.5m³/h | 65m | 1.5” | 2m |
4DLR7.5-100-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 7.5m³/h | 100m | 1.5” | 2m |
4DLR7.5-110-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 7.5m³/h | 110m | 1.5” | 2m |
4DLR11-45-72-550 | Plastic Impeller | 72V | 90V-120V | 550W | 11.0m³/h | 45m | 2” | 2m |
4DLR12-75-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 12.0m³/h | 75m | 2” | 2m |
4DLR11.5-100-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 11.5m³/h | 100m | 2” | 2m |
4DLR14.5-45-110-750 | Plastic Impeller | 110V | 110V-150V | 750W | 14.5m³/h | 45m | 2” | 2m |
4DLR15-55-72-1100 | Plastic Impeller | 72V | 90V-120V | 1100W | 15.0m³/h | 55m | 2” | 2m |
4DLR15.5-70-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 15.5m³/h | 70m | 2” | 2m |
4DLR20-38-110-1500 | Plastic Impeller | 110V | 110V-150V | 1500W | 20.0m³/h | 38m | 2” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DSC5.2-45-48-500 | Stainless steel Impeller | 48V | 60V-90V | 500W | 5.2m³/h | 45m | 1.25” | 2m |
4DSC5.2-67-48-750 | Stainless steel Impeller | 48V | 60V-90V | 750W | 5.2m³/h | 67m | 1.25” | 2m |
4DSC5.2-67-72-750 | Stainless steel Impeller | 72V | 90V-120V | 750W | 5.2m³/h | 67m | 1.25” | 2m |
4DSC5.2-101-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 5.2m³/h | 101m | 1.25” | 2m |
4DSC5.2-101-110-1100 | Stainless steel Impeller | 110V | 110V-150V | 1100W | 5.2m³/h | 101m | 1.25” | 2m |
4DSC5.2-146-110-1300 | Stainless steel Impeller | 110V | 110V-150V | 1300W | 5.2m³/h | 146m | 1.25” | 2m |
4DSC4.8-203-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 4.8m³/h | 203m | 1.25” | 2m |
4DSC7.5-80-110-1300 | Stainless steel Impeller | 110V | 110V-150V | 1300W | 7.5m³/h | 80m | 1.25” | 2m |
4DSC7.5-100-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 7.5m³/h | 100m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DSC11-60-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 11.0m³/h | 60m | 2” | 2m |
4DSC19-35-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 19.0m³/h | 35m | 2” | 2m |
4DSC25-26-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 25.0m³/h | 26m | 2” | 2m |
4/6DSC30-19-72-1100 | Stainless steel Impeller | 72V | 90V-120V | 1100W | 30.0m³/h | 19m | 2” | 2m |
4/6DSC34-22-110-1500 | Stainless steel Impeller | 110V | 110V-150V | 1500W | 34.0m³/h | 22m | 2” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DPC3.5-95-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 3.5m³/h | 95m | 1.25” | 2m |
3DPC3.8-123-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 3.8m³/h | 123m | 1.25” | 2m |
3DPC3.8-155-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 3.8m³/h | 155m | 1.25” | 2m |
3DPC3.8-180-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 3.8m³/h | 180m | 1.25” | 2m |
3DPC5.2-75-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 5.2m³/h | 75m | 1.5” | 2m |
3DPC5.5-65-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 5.5m³/h | 65m | 1.5” | 2m |
3DPC6-84-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 6.0m³/h | 84m | 1.5” | 2m |
3DPC6-125-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 6.0m³/h | 125m | 1.5” | 2m |
3DPC7-46-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 7.0m³/h | 46m | 1.5” | 2m |
3DPC7.5-62–150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 7.5m³/h | 62m | 1.5” | 2m |
3DPC7.5-78-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 7.5m³/h | 78m | 1.5” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
3DSC4.8-95-110-750-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 750W | 4.8m³/h | 95m | 1.25” | 2m |
3DSC4.8-110-150-1100-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 1100W | 4.8m³/h | 110m | 1.25” | 2m |
3DSC4.8-130-200-1500-A/D | Stainless steel Impeller | 110V-240V | 80V-400V | 1500W | 4.8m³/h | 130m | 1.25” | 2m |
###
ITEM | Type | Voltage | Best input voltage(DC) |
Power | Max-Flow | Max-Head | Outlet | Cable |
4DPC6-56-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 6.0m³/h | 56m | 1.25” | 2m |
4DPC6-84-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 6.0m³/h | 84m | 1.25” | 2m |
4DPC6-112-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 6.0m³/h | 112m | 1.25” | 2m |
4DPC6-135-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 6.0m³/h | 135m | 1.25” | 2m |
4DPC9-45-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 9.0m³/h | 45m | 2” | 2m |
4DPC9-58-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 9.0m³/h | 58m | 2” | 2m |
4DPC9-71-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 9.0m³/h | 71m | 2” | 2m |
4DPC9-85-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 9.0m³/h | 85m | 2” | 2m |
4DPC13-36-110-750-A/D | Plastic Impeller | 110V-240V | 80V-400V | 750W | 13.0m³/h | 36m | 2” | 2m |
4DPC13-49-150-1100-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1100W | 13.0m³/h | 49m | 2” | 2m |
4DPC13-54-150-1300-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1300W | 13.0m³/h | 54m | 2” | 2m |
4DPC13-60-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 13.0m³/h | 60m | 2” | 2m |
4DPC17-48-200-1500-A/D | Plastic Impeller | 110V-240V | 80V-400V | 1500W | 17.0m³/h | 48m | 2” | 2m |
Pulley Type
There are several types of pulleys. These include fixed pulleys, load multipliers and movable pulleys. Below is a description of each pulley type. A load multiplier is a special type of pulley with multiple wheels for increased lifting capacity. It is used in a wide range of applications including power transmission and construction. Some common uses of pulleys are listed below.
moving pulley
Movable pulleys work by transferring the weight of a load to another object of the same mass. Since a live pulley is inherently frictionless and weightless, the force required to lift a load with it is the same as the weight of the load. This principle applies to tall buildings and residences. It is an excellent choice for lifting heavy objects such as furniture and washing machines.
A pulley is a mechanical device with a wheel that rotates on a shaft. The axle is attached to the wheel and is usually fixed. The movable pulley can be fixed or movable, both of which can change the direction of the force on the rope. Some pulleys can also change the magnitude and direction of the force. They are ideal for a variety of applications, from lifting heavy objects to transporting objects.
Another type of movable pulley works by transmitting force to another object. It has a free axis and the total force provided by the rope tension is balanced. Since the tension on the rope is constant in each segment, pulling one end of the rope will double the force on the shaft, resulting in two mechanical advantages. This mechanical advantage is the main reason why movable pulleys are so versatile.
Another form of moving pulley is called a KWL diagram. The KWL diagram summarizes the basic concepts of the drive wheel. KWL diagrams are an excellent way to assess a student’s understanding of the concepts discussed in the course. Word questions are a great way to check whether students understand concepts. When students answer the word questions correctly, the answer is yes!
Fixed wheel pulley
If you need to move heavy objects, a single fixed wheel pulley is not a good choice. Using a single fixed pulley might be similar to using a handbag, but it’s not very convenient. This type of pulley system relies on friction to transmit motion. As a result, it can slip and isn’t always reliable. Fortunately, you can find other options that work just as well.
Fixed pulleys are the most basic type of pulley. They consist of grooved wheels and ropes attached to objects. These pulleys make lifting easier. Because the rope or cable only moves in one direction, the movement of the object feels lighter. And they are also easy to install. However, before you buy a fixed wheel pulley, make sure it is strong enough to support the weight of the load.
The disadvantages of fixed pulleys are obvious. One of them is the lack of mechanical advantage. A fixed pulley pulls up with the same force as a single moving pulley, and a single fixed pulley is not particularly effective as a force multiplier. However, the effect is more pronounced when you combine multiple fixed-wheel pulleys. You will get double the power! So what do fixed wheel pulleys have to offer?
Fixed wheel pulleys can be as small as a ring. A single ring pulley requires twice as much force as the weight being pulled. Adding more loops to the rope will reduce the effort required to pull the weight. The mechanical advantage of a fixed pulley is proportional to the number of strands running to the free pulley. A 100-pound pull on the free end will lift a 300-pound load.
composite pulley
Compound pulleys are pulleys that can be used to change the direction of a control wire. It can also be used to modify the mechanical force of the wire by moving the item it is connected to. In galleons, compound pulleys are more common. They are often combined with other ropes for mechanical advantage. Here are some common uses for composite pulleys.
The ideal mechanical advantage of a pulley is equal to the number of rope segments that pull up the load. This means that the more rope segments, the less force is required. A compound pulley will have the ideal mechanical advantage of 2, which means it will generate more force than a simple pulley. Composite pulleys are also more efficient at transmitting force because their number of rope segments is usually equal to the unit weight.
Composite pulley systems use more than two pulleys and ropes. More pulleys will reduce the force required to move heavier objects. They are usually used in large sailboats. The system is also used on construction sites. It can be used for a variety of applications, including lifting large objects or transmitting electricity. You can imagine how it would change your life if you had to move a large sailboat, but the result would be the same: a composite pulley system would make it easier to lift a large sailboat.
Composite pulleys are also known as fixed pulleys. The fixed pulley is stationary, and the movable pulley moves back and forth. The latter is more effective when used with a detachable cord or strap. On the other hand, a moving pulley is a moving pulley and it gives you a mechanical advantage. You can imagine this pulley on a flagpole.
load multiplier
The multiplication system has three basic parts: the rope grab, the connector, and the pulley. While some basic multipliers may combine the three parts, the concept remains the same. The multiplication system can make pulling the rope easier by reducing the amount of friction that occurs. Below are some examples of multiplication systems. A compact rope grab is a great option for resetting the multiplier.
The load reduction that a pulley system can achieve is proportional to the number of ropes used to support it. Although most utility pulley systems use only four ropes, the theoretical maximum load reduction is a quarter of the actual load. In other words, the four-wheel system only reduces the weight of a 1,000-pound load by a quarter. That would require 167 pounds of force, a far cry from the 500-pound load a single pulley system can achieve.
The mechanical advantage of a pulley system can be calculated by calculating the ratio between the forces exerted on each wire. For example, a 90-kilogram load is supported by three ropes, each weighing about thirty-five pounds. The ropes on pulleys A and B each carry a load of 60 kg. Using this formula, a single pulley system will yield a mechanical advantage over two tractors.
To calculate the force required to pull the rope over the pulley, measure the angle and deflection between the ropes. The deflection angle when added to the included angle should equal 180 degrees. A 75 degree angle requires 159% of the load force. This means a total load multiplier of four. This formula is an important tool for calculating the force multiple of the pulley.
Disadvantages of fixed pulleys
There are two basic types of pulleys: movable and fixed. Active pulleys are more advanced, allowing the pulley to move according to the load. They reduce the force required to lift the load. Active roller pulleys are more compact and therefore take up less space. Both types are good for lifting heavier objects, but they each have their pros and cons.
Fixed wheel pulleys can be used to lift heavy objects. This type of pulley consists of a wheel with a fixed shaft that has grooves on its edges for guiding ropes or cables. This is a simple machine as no motor or engine is required to lift objects. When two or more wheels are used together, the ropes around the wheels form a powerful hoist.
Single wheel pulleys are not suitable for lifting. They tend to push things down. Also, they are unreliable because they rely on friction and can slip. Also, a single wheel pulley would require a lot of space. Another disadvantage of fixed-wheel pulleys is that they make it difficult to move heavy objects easily. Single fixed-wheel pulleys also tend to slip easily, making them a poor choice for many applications.
Fixed wheel pulleys are also easier to install and maintain than manually operated ones. It requires less space and lubrication than manual pulleys. Manual pulleys can cause injury because the operator will be lifting the full weight of the heavy object. Additionally, rope slippage can lead to muscle strains and rope burns. And the system requires frequent maintenance.
editor by czh 2022-11-28