China factory Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining supplier

Product Description

Product Description


A conveyor will always consist of at least 2 pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.

Different kinds of conveyor pulleys
KONWEYOUR sells conveyor pulleys in all the following sub-categories: 

Head pulleys

The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).

Tail and CHINAMFG pulleys

The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.

Snub pulleys

A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.

Drive pulleys

Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.

Bend pulleys

A bend pulley is used for changing the direction of the belt.

Take-up pulley

A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.

Product Parameters


Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500

Length of the pulley depends on the belt width of the conveyor 

650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

Packaging & Shipping


Detailed Photos


  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor


Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method:


Initial Payment

Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

drive pulley

What is the significance of proper alignment and tensioning in drive pulley systems?

Proper alignment and tensioning are critical factors in the performance and longevity of drive pulley systems. They play a significant role in ensuring efficient power transmission, reducing wear and tear, and preventing premature failures. Here’s a detailed explanation of the significance of proper alignment and tensioning:


Proper alignment refers to the correct positioning of the drive pulleys in relation to each other and other system components, such as belts, shafts, and bearings. It is crucial for the following reasons:

  • Efficient Power Transmission: Misaligned pulleys can cause the belts to run at an angle, resulting in increased friction and energy loss. This inefficiency can lead to reduced power transmission and decreased overall system performance.
  • Reduced Wear and Tear: Misalignment puts excessive stress on the belts, pulleys, and other components. This can lead to accelerated wear and tear, resulting in increased maintenance and replacement costs. Proper alignment helps distribute the load evenly, minimizing stress and extending the lifespan of the components.
  • Prevention of Belt Slippage: Misalignment can cause belts to slip or derail from the pulleys, leading to a loss of power transmission and potential damage to the belts. Proper alignment ensures that the belts remain securely engaged with the pulleys, preventing slippage and maintaining reliable operation.
  • Optimal Belt Tracking: Correct pulley alignment helps maintain proper belt tracking, ensuring that the belts stay centered on the pulleys and run smoothly. This prevents the belts from rubbing against the pulley edges or adjacent components, reducing friction and minimizing the risk of belt damage.


Proper tensioning refers to the appropriate adjustment of belt tension in drive pulley systems. It is crucial for the following reasons:

  • Optimal Power Transmission: Adequate belt tension is necessary for efficient power transmission. Insufficient tension can result in belt slippage, reducing the transfer of power from the drive pulley to the driven pulley. On the other hand, excessive tension can overload the system, leading to increased wear and power losses.
  • Maintaining Belt Grip: Proper tensioning ensures that the belts maintain sufficient grip on the pulleys, especially when transmitting high torque or operating under heavy loads. This prevents belt slippage and ensures reliable power transfer.
  • Prevention of Belt Damage: Improper tensioning can cause excessive stress on the belts, leading to stretching, cracking, or premature failure. By maintaining the correct tension, the risk of belt damage is minimized, resulting in longer belt life and reduced downtime.
  • Reduced Noise and Vibration: Inadequate tensioning can cause belts to vibrate or produce noise during operation. Proper tensioning helps dampen vibrations, resulting in smoother and quieter system performance.

Overall, proper alignment and tensioning are essential for optimizing the performance, reliability, and longevity of drive pulley systems. They contribute to efficient power transmission, reduced wear and tear, prevention of belt slippage, and minimized maintenance costs. Regular inspection and adjustments should be performed to ensure that the drive pulley system remains properly aligned and tensioned throughout its operation.

drive pulley

What safety considerations should be kept in mind when using drive pulleys?

When using drive pulleys, it is essential to prioritize safety to prevent accidents, injuries, and equipment damage. Here are important safety considerations to keep in mind:

1. Guarding and Enclosure:

Drive pulleys should be properly guarded and enclosed to prevent accidental contact with moving parts. Guards and enclosures should be designed and installed in accordance with applicable safety regulations and standards. They should effectively restrict access to the pulley and associated belts or chains, reducing the risk of entanglement or entrapment. Regular inspection and maintenance of guards and enclosures are necessary to ensure their effectiveness and integrity.

2. Lockout/Tagout Procedures:

When performing maintenance, repair, or servicing tasks involving drive pulleys, proper lockout/tagout procedures must be followed. Lockout/tagout procedures involve isolating the power source, locking out the energy supply, and using tags to communicate the equipment’s inoperable status. This ensures that the drive pulley and associated machinery cannot be accidentally started or operated while maintenance work is being conducted, protecting personnel from unexpected hazards.

3. Training and Education:

Personnel involved in operating, maintaining, or working near drive pulleys should receive proper training and education on safe practices. They should be familiar with the potential hazards associated with drive pulleys and understand the safe operating procedures, including the use of personal protective equipment (PPE), lockout/tagout protocols, and emergency response measures. Ongoing training programs should be implemented to keep personnel updated on safety best practices.

4. Risk Assessment and Hazard Identification:

A comprehensive risk assessment should be conducted to identify potential hazards and risks associated with the operation and maintenance of drive pulleys. This assessment should consider factors such as pinch points, entanglement hazards, electrical hazards, and potential for material spillage or falling objects. By identifying these risks, appropriate control measures can be implemented to mitigate the hazards and ensure a safe working environment.

5. Maintenance and Inspection:

Regular maintenance and inspection of drive pulleys are crucial for safety. Routine inspections should be performed to check for signs of wear, damage, or misalignment. Any issues identified should be promptly addressed, and damaged or worn components should be replaced. Lubrication requirements should be followed to maintain smooth operation and prevent overheating. Adequate records of maintenance and inspections should be maintained for reference and compliance purposes.

6. Ergonomics and Body Mechanics:

When working with drive pulleys, proper ergonomics and body mechanics should be observed to minimize the risk of strain or musculoskeletal injuries. Personnel should be trained in proper lifting techniques, avoiding excessive bending, lifting heavy loads, and maintaining good posture. Mechanical aids, such as hoists or lifting equipment, should be used when handling heavy pulleys or components to reduce the risk of injuries.

7. Warning Signs and Labels:

Appropriate warning signs and labels should be placed near drive pulleys to communicate potential hazards and provide safety instructions. These signs should be clearly visible and easy to understand. They may include warnings about rotating parts, entanglement hazards, pinch points, and required PPE. Warning signs and labels serve as visual reminders to personnel and visitors to exercise caution and follow safety protocols.

8. Emergency Stop and Emergency Response:

Drive pulley systems should be equipped with emergency stop controls that can quickly shut down the equipment in case of emergencies or hazardous situations. Personnel should be trained on the location and operation of emergency stop buttons. Additionally, an emergency response plan should be in place, outlining procedures for addressing accidents, injuries, or equipment malfunctions. This plan should include protocols for providing first aid, reporting incidents, and evacuating the area if necessary.

In summary, ensuring safety when using drive pulleys is of paramount importance. This involves proper guarding, lockout/tagout procedures, training personnel, conducting risk assessments, performing regular maintenance and inspections, observing ergonomics, using warning signs, and having emergency stop controls and response plans in place. By following these safety considerations, the risks associated with drive pulleys can be minimized, promoting a safe working environment.

drive pulley

How does the size and design of a drive pulley affect its performance?

The size and design of a drive pulley have a significant impact on its performance and the overall operation of a power transmission system. The size and design of a drive pulley influence various aspects such as speed, torque, power transfer efficiency, belt or chain life, and system reliability. Here are the key ways in which the size and design of a drive pulley affect its performance:

1. Speed and Torque:

The size of a drive pulley directly affects the speed and torque of the power transmission system. A larger pulley diameter results in higher belt or chain speed and lower torque output. Conversely, a smaller pulley diameter increases torque output but reduces belt or chain speed. By selecting the appropriate pulley size, the system can be optimized to achieve the desired speed and torque requirements for the driven components.

2. Mechanical Advantage:

The design and size ratio between the driving and driven pulleys determine the mechanical advantage of the power transmission system. By using different-sized pulleys or multiple pulley arrangements, the mechanical advantage can be increased or decreased. This affects the force or torque that can be transmitted from the driving source to the driven components. The mechanical advantage provided by the pulley design influences the system’s ability to handle loads or resistance efficiently.

3. Power Transfer Efficiency:

The design and size of a drive pulley impact the power transfer efficiency of the system. An appropriately sized pulley with the right groove profile facilitates proper belt or chain engagement, reducing slippage and power losses. A well-designed pulley minimizes friction and improves the grip between the pulley and the belt or chain, enhancing power transmission efficiency. Proper pulley design, such as V-grooves or toothed profiles, ensures efficient power transfer and reduces energy losses.

4. Belt or Chain Life:

The size and design of a drive pulley can significantly affect the life and durability of the belt or chain used in the power transmission system. Improper pulley design, such as sharp edges or inadequate groove profiles, can cause premature wear and damage to the belt or chain. Additionally, excessive belt tension resulting from an undersized pulley can lead to accelerated belt wear. Choosing the correct pulley size and design helps optimize belt or chain life, reducing maintenance costs and downtime.

5. Vibration and Noise:

The size and design of a drive pulley can influence the level of vibration and noise in the power transmission system. Improperly designed or unbalanced pulleys can introduce vibration, leading to increased wear and reduced system performance. The design of the pulley, such as the groove profile and the use of vibration-damping materials, can help minimize vibration and noise, ensuring smoother operation and improved system reliability.

6. Belt or Chain Tension and Alignment:

The size and design of a drive pulley affect belt or chain tension and alignment in the power transmission system. An undersized pulley can result in excessive belt or chain tension, leading to increased wear and reduced efficiency. Proper pulley design, including adequate groove width and profile, ensures optimal belt or chain engagement, minimizing tension and alignment issues. This promotes longer belt or chain life and reduces the risk of premature failure.

7. System Compactness and Space Constraints:

The size and design of a drive pulley also play a role in system compactness and space constraints. In applications where space is limited, smaller pulleys may be preferred to achieve the desired speed and torque. Conversely, larger pulleys may be required to accommodate higher power requirements or to optimize the mechanical advantage. The compactness and size of the pulley design should be considered to ensure proper installation and efficient use of available space.

In summary, the size and design of a drive pulley have a significant impact on its performance. They influence speed, torque, power transfer efficiency, belt or chain life, vibration, noise, tension, alignment, and system compactness. Careful consideration of these factors is essential in selecting the appropriate pulley size and design to optimize the performance, reliability, and efficiency of the power transmission system.

China factory Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   supplier China factory Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   supplier
editor by CX