The driving drum is the main component of transmitting power.
Dt-ii drive drum according to the load capacity is divided into light, medium and heavy 3 types, drum diameter of 500, 630, 800, 1000mm. with
A roller has several different shaft diameters and center spans for selection.
1) Light: bearing aperture is 80 ~ 100mm, shaft and wheel hub are single key connection, drum is a single plate welded structure, one-way shaft.
2) Medium: bearing aperture is 120 ~ 180mm, shaft and hub are single key connection, there are 2 kinds of one-way and two-way exit shaft
3) Heavy duty: bearing aperture is 200 ~ 220mm, expansion sleeve connection is cast welding cylinder structure.
The surface of the roller is covered with smooth steel, herringbone and CHINAMFG pattern rubber. Herringbone pattern rubber surface friction number, good drainage, but directional,
When installing the herringbone tip should be consistent with the conveyor belt running direction. The conveyor running in both directions should use a CHINAMFG pattern. For important occasions, be sure to Coated with vulcanized rubber; For flame-retardant, flameproof occasions should be used corresponding explosion-proof. Bearing seats are all lubricated with oil cup grease.
|Belt Conveyor Pulley Drum
|Drive Pulley, Bend Pulley,Snub Pulley,Take Up Pulley
|Carbon steel, Stainless steel, Rubber
|Smooth, CHINAMFG grooved lagging, Herringbone lagging, Ceramic lagging
|Submerged Arc Welding
|Tube,shaft,self-aligning bearing,bearing seat/house,hub, locking bushing,end disc
It is used to change the running direction of the conveyor belt or increase the wrapping Angle of the conveyor belt on the transmission drum, and its structural form is divided into light, medium and heavy
Three types, the shaft of the grade diameter of 50 ~ 100mm,120 ~ 180mm and 200 ~ 260mm, the surface of the drum has bare light
Steel surface and smooth rubber surface two.
Specification of Bend Pulley:
|ISO9001:2008, CEMA, DIN, TUV, etc.
|More than 30,000 hours.
|Flat Rubber Lagged, Ceramic Lagged, CHINAMFG Rubber Lagged, etc.
|Length of conveyor bend pulley depends on the width of conveyor Belt. You can get drive pulleys with hot vulcanized rubber lagging, plain or grooved, as required by client.
Drive device: by motor, reducer, high speed shaft coupling or hydraulic coupling, brake, low speed shaft coupling and backstop composed of drive single
The yuan is fixed on the drive frame, and the drive frame is fixed on the foundation.
Packaging & Shipping
Drive pulley and Bend pulley
(1) The roller should check the grease in the bearing seat before installation to ensure that the bearing is filled with lithium grease and the bearing seat is filled with grease
The amount 2/3 of the empty fat volume.
(2) When the transmission drum is a chevron groove surface, pay attention to the direction of the groove should be consistent with the running direction of the conveyor belt to prevent transmission
The conveyor runs off, and is conducive to trench drainage and sewage.
(3) Necessary protective measures shall be taken in the hoisting process, and the rubber surface of the roller shall not be damaged.
(4) During installation, the roller can be adjusted by adding gaskets under the cylinder bearing seat and adjusting screws on the frame
The cylinder position ensures that the axis and center first conform to the formula range listed in Table 14.
HangZhou CHINAMFG Intelligent Conveying System Co.,Ltd (abbreviated as CHINAMFG Intelligent) is the High-end Conveying Equipment brand , with excellent technical team and in house intellectual property & national patents,developing intelligent conveying machinery. Focusing on transforming itself into international competitive one-station solution provider of intelligent conveying system, providing not only intelligent products but also whole cycle management from construction to operation & service for our customers.Our company located in HangZhou city in North China Plain, it’s the cross road of ZheJiang ,ZheJiang and ZheJiang . We have more than 800 units advanced manufacturing equipments, including 20 large and main units and 3 automatic production lines. The factory covers 253,000 square meters. It’s registered capital is 71,550,00 USD, There are more than 300 employees which contains 30 with middle-level titles and 125 technical workers with high technical skills. Xinriseng is mainly engaged in the manufacture, sales and technical services of belt conveyors, large angle belt conveyors, horizontal curved belt conveyors and long distance crossing conveyors. Our products can be used in metallurgy, building materials, electric power, coal, port and other industries, products have been covered the whole domestic market, and exported to the United States, Germany, France and other EU countries, Australia, Brazil, along the Belt and Road countries, Southeast Asian countries and African emerging markets, totally more than 50 countries, gained the customers’ praise.Our company has a number of provincial innovative platforms, relying on the technological radiation, constantly strengthens exchanges and cooperation with scientific research institutes. We have successively formed school-enterprise partnerships with China University of Mining, ZheJiang University, ZheJiang Materials Handling Research Institute, HangZhou University of Architecture and Technology, keeping the conveyor design at the leading level in China. At the same time, our technical team regularly carries out technical exchanges and discussions with foreign companies, learning international leading design concepts and process methods, and keeps pace with international new technologies.With the innovative technology, good quality, CHINAMFG has established a one-stop service system. We will continue adhering to “servingthe users, making contributions to society”, make our company a flagship of conveying industry with international competitiveness. All in all, our company will provide the best products with high quality and competitive price for our customers and share success with you together.
|Chemical Industry, Grain Transport, Mining Transport, Power Plant
What are some real-world examples of drive pulley applications in various industries?
Drive pulleys find extensive applications in various industries where power transmission and control are essential. They play a critical role in numerous systems that involve the movement of materials, products, or people. Here are some real-world examples of drive pulley applications in different industries:
1. Manufacturing and Industrial:
- Conveyor Systems: Drive pulleys are widely used in manufacturing and industrial settings to power conveyor systems that transport materials or products within factories, warehouses, and distribution centers. These systems are employed in industries such as automotive, food processing, logistics, and packaging.
- Machinery: Drive pulleys are utilized in various types of machinery, including milling machines, lathes, drill presses, and woodworking equipment. They enable the transmission of power to drive the rotational motion of cutting tools or workpieces, allowing for precise machining and fabrication processes.
- Textile Industry: Drive pulleys are found in textile machinery, such as spinning machines and looms, where they provide power transmission to move fibers, yarns, and fabrics through different stages of the manufacturing process.
2. Mining and Quarrying:
- Belt Conveyors: Drive pulleys are extensively used in mining and quarrying operations to power belt conveyors that transport bulk materials, such as coal, ores, aggregates, and minerals. These conveyors are crucial for efficient material handling and are commonly employed in mining sites, quarries, and material processing plants.
- Crushers and Screens: Drive pulleys are utilized in crushers and screens to transmit power and control the movement of materials during the crushing and screening processes in mining and quarrying operations. They enable the efficient processing and sorting of various types of minerals and aggregates.
3. Construction and Infrastructure:
- Concrete Plants: Drive pulleys are used in concrete mixing plants and concrete batching plants to power conveyor belts that transport aggregates, cement, and other materials required for concrete production.
- Escalators and Moving Walkways: Drive pulleys are crucial components in escalators and moving walkways, providing the power and control necessary for the continuous movement of steps or walkway surfaces. These systems are commonly seen in shopping malls, airports, train stations, and other public spaces.
- Cranes and Hoists: Drive pulleys are employed in cranes and hoists to transmit power and control the lifting and lowering of heavy loads in construction sites, warehouses, and shipping ports.
4. Automotive and Transportation:
- Engine Systems: Drive pulleys are used in automotive engines as part of the accessory drive system to transmit power from the engine crankshaft to components such as the alternator, power steering pump, water pump, and air conditioning compressor.
- Power Steering Systems: Drive pulleys are employed in power steering systems to transfer power from the engine to the power steering pump, enabling assisted steering in vehicles.
- Heavy-Duty Trucks and Buses: Drive pulleys are utilized in heavy-duty trucks and buses to transmit power from the engine to various accessories and systems, such as the air compressor, hydraulic pump, and cooling fan.
These examples illustrate the diverse range of industries and applications where drive pulleys are integral components. From manufacturing and mining to construction and automotive sectors, drive pulleys are essential for efficient power transmission, material handling, and control in numerous real-world scenarios.
What maintenance procedures are necessary to ensure the reliability of drive pulleys?
Proper maintenance procedures are essential to ensure the reliability and longevity of drive pulleys. Regular maintenance helps identify and address potential issues before they escalate, minimizing downtime and preventing costly breakdowns. Here are some important maintenance procedures for drive pulleys:
1. Visual Inspection:
Perform regular visual inspections of the drive pulleys to check for any signs of wear, damage, or misalignment. Look for cracks, chips, or excessive wear on the pulley surface. Inspect the pulley hub and keyway for any signs of damage or corrosion. Ensure that the pulley is properly aligned with the drive shaft and other components. If any abnormalities are detected, further investigation or corrective action may be necessary.
Follow the manufacturer’s guidelines for lubrication to ensure smooth operation of the drive pulley. Lubrication reduces friction and heat, preventing premature wear and extending the pulley’s lifespan. Apply the recommended lubricant to the pulley bearings or bushings as per the specified intervals. Ensure that the lubricant used is compatible with the pulley material and operating conditions.
3. Tension and Belt/Chain Alignment:
Check the tension of the belts or chains connected to the drive pulley regularly. Incorrect belt or chain tension can lead to slippage, reduced power transmission efficiency, and accelerated wear on the pulley and associated components. Follow the manufacturer’s guidelines or consult the equipment manual for the appropriate tensioning procedures. Additionally, ensure proper alignment between the pulley and the driven components to prevent excessive side loading or belt/chain misalignment.
Keep the drive pulleys clean and free from debris, dust, or contaminants. Regularly remove any accumulated dirt, debris, or residue from the pulley surfaces and grooves. Use appropriate cleaning methods and tools, such as brushes or compressed air, to ensure thorough cleaning without causing damage to the pulley or its components. Clean pulleys help maintain proper belt traction and reduce the risk of slippage.
5. Belt/Chain Maintenance:
In addition to maintaining the drive pulleys, proper maintenance of the belts or chains connected to the pulleys is crucial. Inspect the belts or chains for signs of wear, damage, or stretching. Replace worn-out or damaged belts or chains promptly to prevent adverse effects on the drive pulley’s performance. Follow the manufacturer’s guidelines for belt or chain tensioning, alignment, and replacement intervals.
Imbalance in the drive pulley can result in vibration, increased stress on the pulley and associated components, and reduced overall system performance. Periodically check the balance of the drive pulley and take corrective measures if necessary. Balancing may involve the use of specialized equipment or consulting a professional service provider to ensure proper balancing and smooth operation.
Maintain accurate records of maintenance activities performed on the drive pulleys. This includes recording inspection dates, lubrication schedules, belt or chain replacements, and any corrective actions taken. Proper record-keeping helps track maintenance history, identify recurring issues, and ensure compliance with maintenance schedules and recommendations.
8. Professional Inspection:
Consider engaging a qualified professional or a service provider for periodic inspections and maintenance of drive pulleys, especially in complex or critical applications. Professionals can perform more detailed assessments, identify potential issues, and provide expert recommendations to ensure the reliability and optimal performance of the drive pulleys.
In conclusion, regular maintenance procedures are necessary to ensure the reliability of drive pulleys. Visual inspections, proper lubrication, tension and alignment checks, cleaning, belt/chain maintenance, balancing, record-keeping, and professional inspections all contribute to the longevity and optimal operation of drive pulleys, reducing the risk of failures and improving overall system reliability.
In which industries and applications are drive pulleys commonly used?
Drive pulleys are widely used in various industries and applications where power transmission and motion control are essential. Their versatility and effectiveness make them a fundamental component in numerous mechanical systems. Here are some of the industries and applications where drive pulleys are commonly employed:
1. Manufacturing and Industrial Machinery:
Drive pulleys play a crucial role in manufacturing and industrial machinery. They are used in conveyor systems to transport materials or products along production lines. Drive pulleys enable the movement of items such as bulk goods, packages, and components in industries including automotive, food processing, mining, and logistics. Additionally, drive pulleys are found in various types of machinery, such as pumps, compressors, and generators, where they facilitate power transmission and rotational motion.
2. Agricultural Equipment:
In the agricultural sector, drive pulleys are employed in a range of equipment. They are used in farming machinery, including tractors, combines, and harvesters, to transmit power and control the operation of components such as belts, chains, and augers. Drive pulleys are vital in applications such as grain handling, irrigation systems, and equipment used for planting, harvesting, and processing crops.
3. Construction and Mining:
Drive pulleys are extensively utilized in the construction and mining industries. They are employed in heavy machinery, including cranes, excavators, loaders, and conveyor systems, to facilitate the movement of materials, such as soil, rocks, and ores. Drive pulleys are essential for the operation of equipment involved in earthmoving, material handling, and mineral extraction processes.
4. Material Handling and Warehousing:
In material handling and warehousing applications, drive pulleys are indispensable. They are used in conveyor systems to transport goods, packages, and materials within warehouses, distribution centers, airports, and shipping facilities. Drive pulleys enable the efficient movement of products along assembly lines, sorting systems, and storage areas, ensuring smooth and continuous workflow.
5. Automotive and Transportation:
Drive pulleys find widespread use in the automotive and transportation industries. They are employed in vehicles, including cars, trucks, buses, and trains, to transmit power from engines to various components such as water pumps, alternators, and air conditioning compressors. Drive pulleys also play a role in belt-driven systems, such as power steering and supercharging systems, enhancing vehicle performance.
6. Renewable Energy:
In the field of renewable energy, drive pulleys are utilized in wind turbines and solar tracking systems. Drive pulleys help convert wind or solar energy into rotational motion, driving generators or tracking mechanisms to maximize energy capture. They are critical components that enable efficient power generation in wind farms and solar power plants.
7. Exercise and Fitness Equipment:
Drive pulleys are commonly found in exercise and fitness equipment, such as treadmills, stationary bikes, and weight machines. They facilitate the transfer of power and motion from motors or users to various components, such as belts, flywheels, and resistance systems. Drive pulleys ensure smooth and controlled movement, allowing users to engage in effective workouts.
8. Marine and Shipbuilding:
In the marine industry and shipbuilding sector, drive pulleys are utilized in propulsion systems, winches, cranes, and cargo handling equipment. They play a vital role in transmitting power and controlling the movement of various components, enabling the operation of vessels, offshore platforms, and port facilities.
These are just a few examples of the industries and applications where drive pulleys are commonly used. Their versatility and importance in power transmission and motion control make them indispensable components in a wide range of mechanical systems across different sectors.
editor by CX